Hikvision Rain Shield of Module Door Station
Model: DS-KAVD8003-RS2

• Adapts to two-module surface mounting with protective shield.

• General
• Working Temperature-40° C to +60° C (-40° F to 140° F)
• Working Humidity10% to 95%
• 500g
• Dimension (W × H × D)224x 116.4×58 mm (8.82" x 4.58" x 2.28")
• Installatie

  1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is placed leveled via measuring with the gradienter.

•                                                     Chisel 4 holes with drill align to the screw holes on the sticker.

  The suggested size of hole is 6 (diameter) × 25 (depth) mm.

•                                                    2. Remove the sticker and insert the expansion sleeves into the screw holes. Fix the mounting frame and protective shield onto the wall with 4 expansion                                                           bolts.

•                                                    Thread the module-connecting line across the thread hole of the frame.

•                                                    

  Pass the main unit connecting lines across the thread hole to the upper grid.

• 
  

                                                     Connect the cables and module-connecting line to the corresponding interfaces of the main unit, then place the main unit into the upper grid.

•                                                    Connect the other end of the module-connecting line to the input interface of the sub module.

  Organize the line with cable tie in the package.

•                                                    3. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid

• .                                                  4. Use the hexagon wrench in the package fix the cover onto the frame.

• MateriaalSECC