Hikvision Rain Shield of Module Door Station
Model: DS-KABD8003-RS3(O-STD)

• Adapts to three-module surface mounting with protective shield.

• General
• Working Temperature-40° C to +60° C (-40° F to 140° F)
• Working Humidity10% to 95%
• 702.3g
• Dimension (W × H × D)325.8x 116.4×58 mm (12.83" x 4.58" x 2.28")
• Installatie

  1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is placed leveled via measuring with the gradienter.

•                                                                     

  Drill 4 holes align to the screw holes on the sticker.

  The suggested size of hole is 6 (diameter) × 25 (depth) mm.

•                                                                     2. Remove the sticker and insert the expansion sleeves into the screw holes.

•                                                                     

  Fix the mounting frame and protective shield onto the wall with 4 expansion bolts.

•                                                                     

  Thread the module-connecting lines across the thread holes of the frame.

•                                                                     

  Pass the main unit connecting lines across the thread hole to the top grid.

• 
  

                                                                      Connect the cables and module-connecting line 1 to the corresponding interfaces of the main unit, then place the main unit into the upper grid.

•                                                                     Connect the other end of the module-connecting line1 to the input interface of the sub module. Connect two sub modules via module-connecting line 2.

•                                                                     Organize the line with cable tie in the package.

•                                                                     3. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid.

•                                                                     4. Use the hexagon wrench in the package fix the cover onto the frame.

• MateriaalSECC